Hello,
My Canon i950 has stopped printing correctly. When I print a Print Head Alignment pattern, 1 of the 8 columns do not print at all, one of the others is banded. The i950 will print 5 vertical alignment columns and 3 horizontal alignment columns ... the 2nd of the horizontal columns comes out blank everytime. I have removed the print head and cleaned it with a q-tip and rubbing alchohol, and dont sever deep cleanings following that but the results remain the same.
I'm wondering if this printer is now a throw away, can it be fixed or what means what in regards to the missing column and the banding other. Truth be known I left my print unused for almost a year. It previously printed very well, until I hooked it up again after a year of sitting.
Any advice would be helpful.
Robert
My Canon i950 has stopped printing correctly. When I print a Print Head Alignment pattern, 1 of the 8 columns do not print at all, one of the others is banded. The i950 will print 5 vertical alignment columns and 3 horizontal alignment columns ... the 2nd of the horizontal columns comes out blank everytime. I have removed the print head and cleaned it with a q-tip and rubbing alchohol, and dont sever deep cleanings following that but the results remain the same.
I'm wondering if this printer is now a throw away, can it be fixed or what means what in regards to the missing column and the banding other. Truth be known I left my print unused for almost a year. It previously printed very well, until I hooked it up again after a year of sitting.
Any advice would be helpful.
Robert