EPSON al-m4000 ERR-D1151 BAD ADD 0X9E840000

[khairy]

i have this error in my printer al-m4000 ERR-D1151 BAD ADD 0X9E840000 aftre frimwrae update

 

[ruffin]

Believe your firmware update was corrupted. Firmware Updates Must be Accomplished Without Interruption. Your printer may be permanently damaged, however you can try following:

Download Firmware Update Again, And Attempt Another Install.
Be Sure You Have A Solid Internet Connection.
Refrain From Any Computer Activity During Download and Install Process.
If Successful, Disallow Firmware Updates In Future

Wish you luck

 

[khairy]

thanks
but my printer will not connect to my computer with USB
how i can solve problem

 

[khairy]

Believe your firmware update was corrupted. Firmware Updates Must be Accomplished Without Interruption. Your printer may be permanently damaged, however you can try following:

Download Firmware Update Again, And Attempt Another Install.
Be Sure You Have A Solid Internet Connection.
Refrain From Any Computer Activity During Download and Install Process.
If Successful, Disallow Firmware Updates In Future

Wish you luck

after update
i cannot connect to my printer with usb

 

[ruffin]

Try different USB cable
How do you know printer not connected?

If Printer Firmware was corrupted, incomplete, or otherwise damaged, doubtful you will be successful
with fix.

You can try navigating as follows
Control Panel -> Devices & Printers -> Right Click Printer Icon -> select Remove
Then re-install printer using printer install CD. Follow Epson Install Instructions
Re-connect printer to USB port

 

[khairy]

i try connect with usb or lan but no

 

[ruffin]

Khairy: If Printer Firmware was corrupted, incomplete, or otherwise damaged, You must seek factory repair
service.

 

[khairy]

thanks
no solution

Recovery Mode
The firmware update has failed, and the printer is in recovery mode. Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for instructions on repeating the firmware update.

 

[ruffin]

One last thing to try:

Disconnect power cord from printer for 5 minutes. Then reconnect.

Curios if that might restore original Firmware.

Let me know

 

[khairy]

NOT WORKING I HAVE THIS MESSAGE:

SERVICE REQ ERR-D1151
BADVADDR= 0x9e840000
Err(ERL)= 0x9fc0524