EPSON SX445W can't connect to WLAN

A

Andrew Vaughan

Joined
Feb 23, 2023
Messages
3

Andrew Vaughan​

JoinedFeb 23, 2023Messages1
I have an Epson SX445W which is 12 years old. It was bought in the UK but is installed in Switzerland. I recently changed my Wifi router to a Swisscom Internet 4 box and the printer will not connect to the WLAN. The diagnostic printout says the MAC Address Filtering Check has failed. It also says the wifi signal is low which I find hard to believe as the printer and router are in line of sight over about 3 metres (9 feet). Swiscom did some diagnostics online and say there is nothing in my router settings which would block printer access. In particular, they checked IPv6 settings and said these are all OK. I also set the Firewall to wide-open on the router but with no effect.

Can anyone make any suggestions?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Epson Powerengage 0
Epson SX445W won't connect to WLAN 0
Epson SX445W prints small page on A4 paper 0
Epson Stylus SX445W error message 0
Epson stylus sx445w error 0
Epson stylus sx445w firmware 0
Epson SX445W problem 0
Epson Stylus sx445w 0

Top