Our 2750 is on its second set of liquid ink containers, its only had epson sold and branded ink for that printer. After some time OK its now fallen into a combination of skip and feint. This affects all colours.
Repetitive cleaning (maybe twice, more usually 2-3 times) or one off power cleaning restores full print, but only for then. If the printer sits unused for 24 hours its likely back to poor print again.
1. Verified EPSON ink only
2. All colours affected
3. Printer switched off between prints or left in standby makes NO difference.
4. Printer is located where its always been, in a living room, temp varying day night average 18C down to 14C overnight.
5. Nothing has changed around it.
Friday it had to be power cleaned, bad skipping, recovered OK, used Fri OK, not used Sat or Sun, and Monday its back to poor print. Nozzle clean didn't clear it, power clean has, and its just printed 40 copies perfectly. But for how long??
Any ideas why its gone unreliable please and what to do other than whats been done?
Repetitive cleaning (maybe twice, more usually 2-3 times) or one off power cleaning restores full print, but only for then. If the printer sits unused for 24 hours its likely back to poor print again.
1. Verified EPSON ink only
2. All colours affected
3. Printer switched off between prints or left in standby makes NO difference.
4. Printer is located where its always been, in a living room, temp varying day night average 18C down to 14C overnight.
5. Nothing has changed around it.
Friday it had to be power cleaned, bad skipping, recovered OK, used Fri OK, not used Sat or Sun, and Monday its back to poor print. Nozzle clean didn't clear it, power clean has, and its just printed 40 copies perfectly. But for how long??
Any ideas why its gone unreliable please and what to do other than whats been done?