OKI C9300 Toner Sensor error

Chresten

Chresten

Joined
Feb 10, 2015
Messages
2
I have a laser printer C9300 with the error, cyan toner sensor error. I have cleaned everything, changed the toner, but no result. I could change the drum as well, but I'm pretty shure, that's not it.

Can I adjust the sensor (its a magnet contact above the toner)? Or how do I solve this issue?
 
M

Mats 3d

Joined
Dec 21, 2020
Messages
1
Chresten said:
I have a laser printer C9300 with the error, cyan toner sensor error. I have cleaned everything, changed the toner, but no result. I could change the drum as well, but I'm pretty shure, that's not it.

Can I adjust the sensor (its a magnet contact above the toner)? Or how do I solve this issue?
Click to expand...
The sensor is fitted in the lid obove the toner I tested to just press the lid down when turning on the printer and it helped the error dissapeared!! I put a 5 kg weight on the back right corner and have no more tonersensor error.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Are OKI Drums type C6 42126671 and 42126606 compatible? 0
Looking for printer recommendations for printing a book 0
OKI c531dn printing too dark 0
Looking For New Epson Paper to Print 1
Would someone mind looking at this test sheet? 3
HELP OKI ES7470 0
Oki c9300/9500 transfer belt 0
OKI C9300 Toner Percentages. 3

Top