- Joined
- Mar 23, 2017
- Messages
- 1
Hello all.
I'm seaking for help with my printer.
I've exchanged the pickup roller, and after reassemble the whole printer, it won't start.
The display shows only one dark line, no visible characters and lights up the toner red light.
I've checked the toner cartdrige, and the fuse is blown.
From what I've found so far, this could be normal, just the printer saying the toner is empty.
But if it is the case, shouldn't the printer start normaly?
I've reassembled the printer all over again to check for loose connectors, but everything is fine.
In the service manual I don't find anything related to this behaviour.
Help very appreciated.
I'm seaking for help with my printer.
I've exchanged the pickup roller, and after reassemble the whole printer, it won't start.
The display shows only one dark line, no visible characters and lights up the toner red light.
I've checked the toner cartdrige, and the fuse is blown.
From what I've found so far, this could be normal, just the printer saying the toner is empty.
But if it is the case, shouldn't the printer start normaly?
I've reassembled the printer all over again to check for loose connectors, but everything is fine.
In the service manual I don't find anything related to this behaviour.
Help very appreciated.