- Joined
- Jul 5, 2017
- Messages
- 1
I would like to use the "Scan to network host" / "Network" on my (old) Lexmark X4975 (All-In-one) Inkjet Printer & Scanner.
The config-web-interface of this printer only lists my Windows 10 PC in the "Configuration > Scan to Network Host Management" settings but not my new NAS a WD My Cloud Mirror System (Gen2) (all connected via WiFi).
I activated NFS, SMB 1,2,3, FTP, set the Workgroup on the NAS and Printer to "WORKGROUP", AFP, SMNP, is active too. The Printer, NAS and Windows PC are in the same Wifi-Network 192.168.0.x and reachable.
It seems that the printer only sees and lists the Windows PC where I installed the Lexmark driver/software for Windows 8 from Lextmark but unfortunately not the NAS.
Is there any change to be able to use the "Scan to network" functionality of this printer to print to my WD My Cloud Mirror NAS?
e.g. by uploading a config file via FTP to the printer?
The config-web-interface of this printer only lists my Windows 10 PC in the "Configuration > Scan to Network Host Management" settings but not my new NAS a WD My Cloud Mirror System (Gen2) (all connected via WiFi).
I activated NFS, SMB 1,2,3, FTP, set the Workgroup on the NAS and Printer to "WORKGROUP", AFP, SMNP, is active too. The Printer, NAS and Windows PC are in the same Wifi-Network 192.168.0.x and reachable.
It seems that the printer only sees and lists the Windows PC where I installed the Lexmark driver/software for Windows 8 from Lextmark but unfortunately not the NAS.
Is there any change to be able to use the "Scan to network" functionality of this printer to print to my WD My Cloud Mirror NAS?
e.g. by uploading a config file via FTP to the printer?
Attachments
Last edited: