WLAN won't connect

A

Andrew Vaughan

Joined
Feb 23, 2023
Messages
3
I have a SX445W which is 12 years old. It was bought in the UK but is installed in Switzerland. I recently changed my Wifi router to a Swisscom Internet 4 box and the printer will not connect to the WLAN. The diagnostic printout says the MAC Address Filtering Check has failed. It also says the wifi signal is low which I find hard to believe as the printer and router are in line of sight over about 3 metres (9 feet). Swiscom did some diagnostics online and say there is nothing in my router settings which would block printer access. In particular, they checked IPv6 settings and said these are all OK. I also set the Firewall to wide-open on the router but with no effect.

Can anyone make any suggestions?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

TS3322 won't print 0
Won't print black except on "test print". Will print all colours. TS6051 0
Won't print e-mail notification. 0
Epson Stylus 4000. Channels 6 and 7 won't print. Heads cleaned manually, good stream. 1
Samsung ML2026 found by router using USB but won't print 0
XP4100 Printer won't print 0
no wlan option 0
WLAN problems with Brother HL-L2360DW 1

Top