HP Smart app on MAC allow scanning but not "Print center"

[Fauvel]

MAC with Sequoia (15.4) . HP app "HP Smart" allows scanning. But if I use "Print Center" as I used to,
it allows printing but does not see the scanner of the printer (HP Pjhotosmart 7520 multifunction)
Any idea how to fix this

 

[Fauvel]

MAC with Sequoia (15.4) . HP app "HP Smart" allows scanning. But if I use "Print Center" as I used to,
it allows printing but does not see the scanner of the printer (HP Pjhotosmart 7520 multifunction)
Any idea how to fix this

I must add that the "HP Smart" app require logging to HP web site which is just pain in the
neck when you just want ti scan quickly. Very poor practice from HP.

 

[Fauvel]

Seem has been this way for few years and HP does not allow any other way. Last HP printer I buy.

 

[printerdriver1]

MAC with Sequoia (15.4) . HP app "HP Smart" allows scanning. But if I use "Print Center" as I used to,
it allows printing but does not see the scanner of the printer (HP Pjhotosmart 7520 multifunction)
Any idea how to fix this

Hey, had the same issue after updating. Try removing the printer from System Settings > Printers & Scanners, then re-adding it—but make sure to choose it as a scanner too when it shows up. Also, check if HP Easy Scan works better than Print Center. Sometimes Sequoia just needs a driver refresh.